Gaming For PC (GFPC)

How To Take A Xbox One Controller Apart [6 Steps]

how to take a xbox one controller apart

Table of Contents

Imagine you just bought a brand new Xbox controller and you notice that the bumper buttons are not working. You could go on the internet to try and fix it but what if you could fix it yourself? 

Taking apart an Xbox One controller can be a fun thing to do. But how do you take an Xbox controller apart? If you think about it, you can learn a lot about the Xbox One controller by taking it apart. For example, you can see firsthand how the Xbox one controller comes together and how it functions.

The Xbox One controller is one of the best controllers around, but that doesn’t mean it can’t be made better. There are several reasons why the Xbox one controller can be disassembled, but in this article, we are going to focus on how to disassemble the Xbox one controller to upgrade it.

Steps To Take Apart An Xbox One Controller 

Step 1: Open the controller 

Step 2: Remove the controller’s battery unit 

Step 3: Remove the screws from the controller’s motherboard 

Step 4: Remove the screws from the controller’s buttons 

Step 5: Disconnect the controller’s cables 

Step 6: Pull the controller’s motherboard out of its case.

It is a good idea to know how to take an Xbox one controller apart to clean it. This helps to make sure that the buttons and the controller’s wires are working properly. The screws under the Xbox one controller must first be located. 

Once you do that, take the screws out. Next, you will need to open up the controller, and then you will be able to open up the d-pad. This is where you will find the wiring. Remove the wires and clean them off. Remember to do this regularly.

Replace the battery in your Xbox one controller and get a flathead screwdriver. Remove the battery cover. On the rear of the controller, you will discover 7 L-shaped screws. Take these screws out. They are all the same size. 

Take a glance at the controller’s back now. You will see a little black latch. Using your thumb, push on the latch to release the back. The circuit board should now be accessible to you. 

Remove the screws from the controller board using a flathead screwdriver. You might need a smaller one to get some of the screws out. Get the new battery and put it in the battery housing.

How to take a Xbox One controller apart:

  • Make sure the Xbox is Turned off
  • Remove the thumb-sticks by pulling off the controller’s casing. The casing can be removed by gently pulling.
  • Put the controller flat on a soft surface. Then take a Phillips or flathead screwdriver and remove the screws from the back of the controller.
  • Unscrew the whole controller and open it up to expose the inside of the controller.
  • Take the two AA batteries out.
  • Find the screws holding the circuit board in place. Unscrew them.
  • Lift the board and put it aside.
  • Disconnect the wires that are attached to the circuit board.
  • Lift the circuit board and take it away.
  • The batteries are located at the bottom of the controller.

When to take apart an Xbox controller

disassemble xbox controller

Any gaming experience can be improved by using a high-quality video game controller, but the majority of controllers are only designed to perform properly for a certain amount of time before breaking. Sometimes it is simply a single component of the controller that is broken. In the course of normal use, several of the controller’s components wear out and need to be replaced. When it comes to video game controllers, most individuals will want to replace only a particular component instead of the entire unit.

The reasons why you need to take an Xbox One apart are several. Some folks are simply inquisitive and want to know how their equipment works while some want to repair their malfunctioning Xbox One. No matter your motivation for taking it apart, it is a good idea to do so in an environment that is clean and tidy.

When your input device isn’t responding, opening your Xbox one controller is the most common solution. Once you’ve disassembled the Xbox One controller, you’ll want to make sure the battery is charging and working properly. You’ll have to buy a new one if it’s not. If the contacts are corroded, use rubbing alcohol and a cotton swab to remove the corrosion.

Important Tips To Note

how do you take a xbox controller apart

Before attempting to take apart an Xbox One controller, take numerous safety precautions. Some are as simple as turning off the power switch and unplugging the controller from the outlet. If the controller is linked to a console, it should be unplugged from the console first. 

Turn the controller off by flipping the little switch on the back of the device. If the controller is connected to a phone or tablet, it should be unplugged from the phone or tablet first. With a flick of its small switch located on its rear, you’ll shut down the controller.

You could potentially harm your Xbox one controller by dismantling it if you aren’t careful. The screws on the controller’s back should be removed next. After that, use a flat-head screwdriver to pry open the controller and remove the battery. Remove the screws from the battery compartment and back of the controller; now you may disassemble the device. 

Now, it is up to you how you take an Xbox One controller apart while keeping in mind the tips and precautions mentioned.

Tools Required

Screwdriver Set – Repair Kit for Xbox One Controller

61aZB+nU92L. AC SX522
  • For Xbox One, Xbox One Elite, Xbox One S, Xbox One X and Xbox 360 controller
  • High-quality magnetized screwdrivers with rubberized grips and rotating handle caps
  • Full set of screws for the Xbox One controller
  • Resistive ESD coating Tweezer helps protect the controller from static damage while opening or installing
  • Standard and triangle prying stick – easy to open the controller shell without damage
  • High-quality cleaning brush

First, you need to take the controller apart. Start by using a prying tool to open the controller up. Use the safety Torx on the screws on the side of the controller to remove the battery cover. 

Then remove the AA batteries and let the controller sit until you’re ready to reassemble it. Take the flathead screwdriver and put it under the little black tab on the side of the battery cover.

Use the prying tool to pry up the tab until it releases. After you remove the black tab, use the safety Torx bit to remove the four screws in the battery cover. 

After that, there are three screws with the T6 Torx. Now, remove the bottom cover with your prying tool. After that, you can use your prying tool to splay the controller apart. Once it is open, you will have access to the circuit board, which you will be able to modify. 

To separate the controller, you can use a card and separate it. The next step is to reuse the batteries and motherboard. You can use the motherboard for your computer’s program. 

How To Repair The Xbox One Controller

take an xbox controller apart

The Xbox One Controller is the best video game controller that Microsoft makes, and it works with the Xbox One gaming console. The controller body has many parts that are meant to make playing games better. 

The thumbsticks are one of the most common things that go wrong with the Xbox One controller (also referred to as analogue sticks). The thumbsticks have a disc on top that can come loose. The Xbox One Controller thumbstick repair kit is made to make it easy and quick to fix your thumbsticks.

Do your Xbox One controllers give you trouble? Do the analog sticks on your Xbox One controller break or get scratched? Are your buttons not as strong as they used to be? Are you trying to save money by fixing your controller yourself? Then this is the right article for you!

If you’ve been using your controller a lot recently, it’s possible that the analog sticks have worn out or aren’t working right. To fix this, you’ll need a screwdriver to unscrew the controller and a pair of pliers to take out the analog sticks and put in new ones. 

Most game stores carry these new ones. Follow these steps to fix your Xbox One controller most of the time. Your Xbox One controller should work again.

They aren’t too expensive to replace, but sometimes it’s better to try to fix the controller yourself. First, pull the controller away from the console. Then take the batteries out of the controller and clean any dirt that might be on the controller or in the places where the batteries go. 

Next, use your screwdriver to remove the screws from the back of the controller. Lastly, take off the broken parts and put the new ones in their place. Then, connect the controller to your console again. Next, connect the controller to the console again. 

You can get the Xbox One Wireless Controller Firmware Update on the Microsoft site. Click “Update” and wait for the controller to get the new information. When you’re done, you should have a controller that works again. If you can’t reach everything, you can ask a friend for help, but the basic steps are easy to follow and anyone can do them!

Potential issues

It’s fun to play with the Xbox One controller. It is a controller that comes with a joystick and trigger buttons that are of reasonable quality and level of accuracy. In addition to that, it possesses a d-pad in addition to four bumper buttons that are organized in the shape of a diamond. The right and left, the top and bottom, and the diagonal movements are all controlled by these buttons. 

The grip houses the triggers, while the central portion of the weapon houses the face buttons. The gamer has a much easier time exerting control over the game when the triggers and joystick are arranged in this particular order.

You may have come to the conclusion that disassembling an Xbox One controller is a smart move. However, before you go ahead, you should make sure that you have a complete understanding of all of the potential consequences. 

You shouldn’t only be concerned about the harms that are done directly to you. It is also the result of continuing to use the controller after it has been used. For instance, if you use a screwdriver to unscrew two screws and inadvertently scrape the paint while doing so, this can cause the paint on the controller to wear down over time and look discolored. And you may not even notice this for a very long time!

When disassembling an Xbox One controller, it is essential to go slowly and methodically through the process. If you are not careful, it will be simple for you to begin ripping out the buttons, but if you are not careful, you will find that you will rip out the wires. This is because the wiring is what joins each component in a group and is what enables the whole thing to function. 

It is in your best interest to avoid ripping and tearing apart the wires and buttons on the controller, as doing so will render it inoperable. You won’t have a controller with which you can play your games, and you’ll have to undo the work you’ve already done because you won’t have one. Avoid becoming irritated with yourself and take some time to appreciate the enjoyable hobby that is disassembling Xbox One controllers.


The Xbox One Controller is a great gaming device, but it is not without its flaws. That is why many gamers are turning to modding their controllers to improve the way they play and to extend the life of their controllers. This blog took you through the step-by-step process of taking apart an Xbox One controller and also offered some tips to help you get the most out of your modded controller.

We hope you enjoyed our article on taking an Xbox One controller apart. With this knowledge, we know that you can fix your Xbox one controller or mod it to be even better! So what are you waiting for? Get started modding your Xbox One controller today.

The video below will show you in-depth how to take a Xbox One controller apart.


Join our Gaming For PC discord server and keep up with the latest updates, news, giveaways and more!